Sub-Zero Refrigerator Error Code 05 (EC 05): Cabinet Thermistor
Code 05 points to the refrigerator cabinet thermistor reading open, shorted or erratic. Cycle the breaker for 30 seconds, then call if it returns.
Sub-Zero 700TFI column freezer — model notes, common issues and what to have ready before booking.
When a technician opens a service call for the Sub-Zero 700TFI, the first useful information is whether the problem is in the freezing side or in the ice maker. Say whether the ice maker has stopped, is producing small cubes or has slowed, and whether the freezer itself is holding a steady temperature. Water under the cabinet is also worth reporting with its location and how much you found. Mention any new compressor or fan sound and when it began. This is an older model that is still worth repairing. Customers in our coverage area should include the model number 700TFI and those answers in the booking form.
| Model | 700TFI |
|---|---|
| Appliance | 27-inch column freezer with ice maker |
| Common symptoms | An ice maker that stopped, small cubes or slow production, an unsteady freezer temperature, water under the cabinet, and a new compressor or fan sound. |
| What you can check | Say whether the problem is in the freezing side or the ice maker: stopped, small cubes or slowed, and whether the freezer holds a steady temperature. Note where water sits under the cabinet and how much. |
| When to call a technician | Report to a technician if the ice maker stays stopped, the freezer will not hold steady, or water and new noise continue. Mention when the sound began. |
700TFI is a Sub-Zero column freezer. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
Code 05 points to the refrigerator cabinet thermistor reading open, shorted or erratic. Cycle the breaker for 30 seconds, then call if it returns.
Code 06 relates to the refrigerator evaporator thermistor. The owner step is a 30-second breaker reset; a technician checks the sensor.
EC 07 concerns the freezer cabinet thermistor. Reset the breaker for 30 seconds; if 07 returns, a technician inspects the sensor.
Code 08 refers to the freezer evaporator thermistor. A 30-second breaker reset is the owner step; persistent 08 needs a technician.
Code 20 (EC 20) is a defrost fault: underheat with no voltage feedback on 600, 700 and IC-27 units, a faulty defrost bimetal on 648PRO.
Code 21 (EC 21) is a defrost overheat on 600, 700 (incl. 736) and IC-27 units.
Code 22 (EC 22) means no voltage feedback through the gray/white wire at defrost start.
Code 23 (EC 23) is defrost overheat with no voltage feedback at defrost start.
Code 24 (EC 24) is defrost underheat on 600, 700 (incl. 736) and IC-27 units.
Code 30 (EC 30) means the ice maker water valve solenoid was activated excessively on 600, 700 and IC-27 units.
Code 40 (EC 40 / EC40) signals excessive compressor run time. The owner path depends on how far off the temperatures are.
EC50 with a flashing Service light reports excessive refrigerator compressor run. Whether to clear it depends on the cabinet temperature.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.