Code 23 (EC 23) is defrost overheat with no voltage feedback at defrost start.
Model compatibility: Sub-Zero reused visible code strings across series and model years, so 23 / EC 23 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Code 23 (EC 23) means defrost overheat together with no voltage feedback through the gray/white wire at defrost start.
Two defrost findings are combined in 23 (also shown as EC 23): the defrost overheated, and no voltage feedback came back through the gray/white wire when defrost began.
At a glance
Code
23 / EC 23
What it means
Code 23 (EC 23) means defrost overheat together with no voltage feedback through the gray/white wire at defrost start.
What you can check
Switch the unit's home circuit breaker off for 30 seconds and back on again, then see how the unit operates.
When to call a technician
If 23 appears again after the reset, arrange a technician visit and mention that the breaker was already cycled.
Applies to
600 Series
700 Series, 736 included
IC-27 Integrated Columns
Undercounter (UC) Series
648PRO Series, where the entry lists the code with no stated cause
The reset
Switch the unit’s home circuit breaker off for 30 seconds and back on again, then see how the unit operates. If 23 appears again, arrange a technician visit.
For Sub-Zero refrigerators we serve the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 972-4767 or go to our refrigerator service page with the code, model and serial number, and say that the breaker was already cycled.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Sub-Zero appliance?
Book a specialist visit for a clear estimate and approval before any repair.