Skip to content
Sub-Zero appliance repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Sub-Zero Refrigerator Error Code 20: Defrost Fault (EC 20)

Error code 20
Appliance Refrigerator
Quick answer

Code 20 (EC 20) is a defrost fault: underheat with no voltage feedback on 600, 700 and IC-27 units, a faulty defrost bimetal on 648PRO.

Model compatibility: Sub-Zero reused visible code strings across series and model years, so 20 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Defrost underheat with no voltage feedback through the gray/white wire at defrost start (600, 700, IC-27); faulty defrost bimetal operation (648PRO).

Code 20 may also appear as EC 20 or EC20. It is a defrost message, and the wording depends on the series.

At a glance

Code 20
What it means Defrost underheat with no voltage feedback through the gray/white wire at defrost start (600, 700, IC-27); faulty defrost bimetal operation (648PRO).
What you can check Switch the unit's home circuit breaker off for 30 seconds, switch it on, and retest to see whether code 20 comes back.
When to call a technician If code 20 returns after the reset, book service and tell the technician which series you have and what the reset did.

600 Series, 700 Series (including 736) and IC-27 Integrated Columns

Defrost underheat: no voltage feedback comes back through the gray/white wire when a defrost cycle starts.

648PRO Series

Faulty defrost bimetal operation.

What owners can do

Switch the unit’s home circuit breaker off for 30 seconds, switch it on and retest. A returning code 20 means book service.

  • EC21: defrost overheat
  • EC22: no voltage feedback through the gray/white wire at defrost start
  • Code 20 2 00: defrost bi-metal stuck open
  • Code 20 2 01: defrost bi-metal stuck closed

Sub-Zero defrost repair and service

Defrost faults on Sub-Zero refrigerators are handled in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 972-4767 or see the refrigerator repair page, and say which series you have, that the code is 20 and what the reset did.

Source: Sub-Zero owner support: 600 Series error codes; Sub-Zero owner support: 648PRO Series error codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Sub-Zero appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Sub-Zero appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Sub-Zero appliance repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.

Request your repair

Fields marked with * are required.

Call Schedule a visit