Sub-Zero Refrigerator Error Code 05 (EC 05): Cabinet Thermistor
Code 05 points to the refrigerator cabinet thermistor reading open, shorted or erratic. Cycle the breaker for 30 seconds, then call if it returns.
Sub-Zero UC-24CI undercounter refrigerator-freezer with ice maker — model notes, common issues and what to have ready before booking.
A technician visiting an undercounter refrigerator-freezer with an ice maker will want to see the bin and the floor before anything else. Tell them whether water sits at the base of the cabinet, whether the bin has frozen into one block and whether the cubes that form are small, hollow or cloudy. Note how long ice production has been slow. The Sub-Zero UC-24CI is an older model still worth repairing, and clear timing helps the first look stay focused. Note the time since the bin was last emptied and any changes in cube size. Households in the cities we cover should add UC-24CI and these notes to the booking form.
| Model | UC-24CI |
|---|---|
| Appliance | 24-inch undercounter freezer with ice maker |
| Common symptoms | Water at the cabinet base, a bin frozen into one block, small, hollow or cloudy cubes, slow ice production. |
| What you can check | Tell the technician whether water sits at the base, whether the bin has frozen into one block and what the cubes look like. Note how long ice has been slow and when the bin was last emptied. |
| When to call a technician | Book a technician if water remains at the base, the bin keeps freezing solid or cubes stay poor. Clear timing helps the first look stay focused. |
UC-24CI is a Sub-Zero 24″ undercounter refrigerator-freezer with ice maker. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note whether the water supply was recently changed and how long production has been slow.
Code 05 points to the refrigerator cabinet thermistor reading open, shorted or erratic. Cycle the breaker for 30 seconds, then call if it returns.
Code 06 relates to the refrigerator evaporator thermistor. The owner step is a 30-second breaker reset; a technician checks the sensor.
EC 07 concerns the freezer cabinet thermistor. Reset the breaker for 30 seconds; if 07 returns, a technician inspects the sensor.
Code 08 refers to the freezer evaporator thermistor. A 30-second breaker reset is the owner step; persistent 08 needs a technician.
Code 20 (EC 20) is a defrost fault: underheat with no voltage feedback on 600, 700 and IC-27 units, a faulty defrost bimetal on 648PRO.
Code 21 (EC 21) is a defrost overheat on 600, 700 (incl. 736) and IC-27 units.
Code 22 (EC 22) means no voltage feedback through the gray/white wire at defrost start.
Code 23 (EC 23) is defrost overheat with no voltage feedback at defrost start.
Code 24 (EC 24) is defrost underheat on 600, 700 (incl. 736) and IC-27 units.
Code 40 (EC 40 / EC40) signals excessive compressor run time. The owner path depends on how far off the temperatures are.
EC50 with a flashing Service light reports excessive refrigerator compressor run. Whether to clear it depends on the cabinet temperature.
Note whether the water supply was recently changed and how long production has been slow.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.