Sub-Zero Refrigerator Error Code 05 (EC 05): Cabinet Thermistor
Code 05 points to the refrigerator cabinet thermistor reading open, shorted or erratic. Cycle the breaker for 30 seconds, then call if it returns.
Sub-Zero UC-24C undercounter refrigerator-freezer — model notes, common issues and what to have ready before booking.
The first sign on an undercounter refrigerator-freezer is often a fresh-food area that feels a little warmer than the setting, or a compressor that runs in longer bursts. Owners sometimes hear it before they see it, and the change may be easy to dismiss at first. A water puddle under the front or a slow ice maker can follow. The Sub-Zero UC-24C is an older model still worth repairing. Write down which section felt warm, when the sound began and whether any water has appeared. Customers across the metro areas we serve should list the model number UC-24C and those notes in the booking form.
| Model | UC-24C |
|---|---|
| Appliance | 24-inch undercounter refrigerator-freezer |
| Common symptoms | Warmer fresh-food area, compressor running in longer bursts, a puddle under the front, slow ice maker. |
| What you can check | Write down which section felt warm, when the sound began and whether any water has appeared. |
| When to call a technician | A fresh-food area that stays warm, a compressor that keeps running in long bursts or a puddle under the front is a reason to book a service visit. |
UC-24C is a Sub-Zero 24″ undercounter refrigerator-freezer. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
Code 05 points to the refrigerator cabinet thermistor reading open, shorted or erratic. Cycle the breaker for 30 seconds, then call if it returns.
Code 06 relates to the refrigerator evaporator thermistor. The owner step is a 30-second breaker reset; a technician checks the sensor.
EC 07 concerns the freezer cabinet thermistor. Reset the breaker for 30 seconds; if 07 returns, a technician inspects the sensor.
Code 08 refers to the freezer evaporator thermistor. A 30-second breaker reset is the owner step; persistent 08 needs a technician.
Code 20 (EC 20) is a defrost fault: underheat with no voltage feedback on 600, 700 and IC-27 units, a faulty defrost bimetal on 648PRO.
Code 21 (EC 21) is a defrost overheat on 600, 700 (incl. 736) and IC-27 units.
Code 22 (EC 22) means no voltage feedback through the gray/white wire at defrost start.
Code 23 (EC 23) is defrost overheat with no voltage feedback at defrost start.
Code 24 (EC 24) is defrost underheat on 600, 700 (incl. 736) and IC-27 units.
Code 40 (EC 40 / EC40) signals excessive compressor run time. The owner path depends on how far off the temperatures are.
EC50 with a flashing Service light reports excessive refrigerator compressor run. Whether to clear it depends on the cabinet temperature.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.