Sub-Zero Refrigerator Error Code 05 (EC 05): Cabinet Thermistor
Code 05 points to the refrigerator cabinet thermistor reading open, shorted or erratic. Cycle the breaker for 30 seconds, then call if it returns.
Sub-Zero 680 side-by-side refrigerator with dispenser — model notes, common issues and what to have ready before booking.
With a side-by-side that includes a dispenser, the exact model number decides which water, dispenser and cooling parts a technician should expect to check. Two cabinets that look alike can have different dispenser hardware, so the number on the rating label is worth copying carefully. The Sub-Zero 680 is an older model that is still worth repairing. Describe whether the dispenser runs without ice, whether the fresh-food side has warmed and whether water appears on the floor. Those details, paired with the number, make it easier to confirm the right path before a visit. Across the cities we cover, enter the model number 680 and the dispenser symptom in the booking form.
| Model | 680 |
|---|---|
| Appliance | 42-inch side-by-side refrigerator with dispenser |
| Common symptoms | A dispenser that runs without ice, a fresh-food side that has warmed, and water on the floor. |
| What you can check | Copy the model number carefully from the rating label, since it decides which dispenser, water and cooling parts apply. Describe whether the dispenser runs without ice and whether water appears on the floor. |
| When to call a technician | A dispenser that runs dry, a warmed fresh-food side or floor water should be seen by a technician. Give the model number and the dispenser symptom when you book. |
680 is a Sub-Zero side-by-side refrigerator with dispenser. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
Code 05 points to the refrigerator cabinet thermistor reading open, shorted or erratic. Cycle the breaker for 30 seconds, then call if it returns.
Code 06 relates to the refrigerator evaporator thermistor. The owner step is a 30-second breaker reset; a technician checks the sensor.
EC 07 concerns the freezer cabinet thermistor. Reset the breaker for 30 seconds; if 07 returns, a technician inspects the sensor.
Code 08 refers to the freezer evaporator thermistor. A 30-second breaker reset is the owner step; persistent 08 needs a technician.
Code 20 (EC 20) is a defrost fault: underheat with no voltage feedback on 600, 700 and IC-27 units, a faulty defrost bimetal on 648PRO.
Code 21 (EC 21) is a defrost overheat on 600, 700 (incl. 736) and IC-27 units.
Code 22 (EC 22) means no voltage feedback through the gray/white wire at defrost start.
Code 23 (EC 23) is defrost overheat with no voltage feedback at defrost start.
Code 24 (EC 24) is defrost underheat on 600, 700 (incl. 736) and IC-27 units.
Code 30 (EC 30) means the ice maker water valve solenoid was activated excessively on 600, 700 and IC-27 units.
Code 40 (EC 40 / EC40) signals excessive compressor run time. The owner path depends on how far off the temperatures are.
EC50 with a flashing Service light reports excessive refrigerator compressor run. Whether to clear it depends on the cabinet temperature.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.