Sub-Zero Refrigerator Error Code 05 (EC 05): Cabinet Thermistor
Code 05 points to the refrigerator cabinet thermistor reading open, shorted or erratic. Cycle the breaker for 30 seconds, then call if it returns.
Sub-Zero 601F freezer — model notes, common issues and what to have ready before booking.
Before booking a repair for this freezer, a few checks outside the cabinet can clarify what the technician will be looking at. Confirm the unit is plugged in and that the controls show the setting you expect. Look at the lid or door seal for cracks and see whether it closes all the way with nothing caught in it. Check the floor beneath the cabinet for water, and listen for a compressor that keeps running without a break. The Sub-Zero 601F is an older freezer that is still worth repairing when the cabinet holds its shape. Note whether the trouble began after a power interruption or a move. Households in the cities we serve should enter the model number 601F and what they observed in the booking form.
| Model | 601F |
|---|---|
| Appliance | freezer |
| Common symptoms | A compressor that runs without a break, water beneath the cabinet, a lid or door seal with cracks, and trouble after a power interruption or a move. |
| What you can check | Confirm the unit is plugged in and the controls show the setting you expect. Look at the lid or door seal for cracks, check the floor for water, and listen for a compressor that never stops. |
| When to call a technician | If the seal and power look fine but the compressor still runs nonstop or water keeps appearing, schedule a technician. Say whether it began after a power interruption or a move. |
601F is a Sub-Zero freezer. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
Code 05 points to the refrigerator cabinet thermistor reading open, shorted or erratic. Cycle the breaker for 30 seconds, then call if it returns.
Code 06 relates to the refrigerator evaporator thermistor. The owner step is a 30-second breaker reset; a technician checks the sensor.
EC 07 concerns the freezer cabinet thermistor. Reset the breaker for 30 seconds; if 07 returns, a technician inspects the sensor.
Code 08 refers to the freezer evaporator thermistor. A 30-second breaker reset is the owner step; persistent 08 needs a technician.
Code 20 (EC 20) is a defrost fault: underheat with no voltage feedback on 600, 700 and IC-27 units, a faulty defrost bimetal on 648PRO.
Code 21 (EC 21) is a defrost overheat on 600, 700 (incl. 736) and IC-27 units.
Code 22 (EC 22) means no voltage feedback through the gray/white wire at defrost start.
Code 23 (EC 23) is defrost overheat with no voltage feedback at defrost start.
Code 24 (EC 24) is defrost underheat on 600, 700 (incl. 736) and IC-27 units.
Code 30 (EC 30) means the ice maker water valve solenoid was activated excessively on 600, 700 and IC-27 units.
Code 40 (EC 40 / EC40) signals excessive compressor run time. The owner path depends on how far off the temperatures are.
EC50 with a flashing Service light reports excessive refrigerator compressor run. Whether to clear it depends on the cabinet temperature.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.