Code 20 2 05 reports a mis-wired defrost bi-metal on Classic (BI) and Designer units.
Model compatibility: Sub-Zero reused visible code strings across series and model years, so 20 2 05 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Code 20 2 05 means a mis-wired defrost bi-metal; on Designer units the temperatures are normal.
Code 20 2 05 is a wiring-type report on the defrost bi-metal. The two series word it a little differently.
At a glance
Code
20 2 05
What it means
Code 20 2 05 means a mis-wired defrost bi-metal; on Designer units the temperatures are normal.
What you can check
Cut the breaker to the unit for 30 seconds, restore it, and test the operation. That reset is the only owner step for this code.
When to call a technician
Once the code shows up again after the reset, book a technician visit to check the defrost bi-metal wiring.
Classic Series (formerly Built-In, BI)
This older built-in line lists the code simply as a mis-wired bi-metal.
Designer Series (formerly Integrated)
Here the entry adds a detail: a defrost bimetal mis-wire with normal temperatures. The fault is the same kind; the extra phrase says temperatures are normal when it is flagged.
What the owner does
Both series list one owner step. Cut the breaker to the unit for 30 seconds, restore it, and test the operation. If 20 2 05 shows up again after the reset, book a technician visit.
20 2 07: a defrost bimetal error with the evaporator thermistor not within the appropriate value at the end of defrost.
Where to get Sub-Zero service
If the code returns, our Sub-Zero technicians cover the Miami, New York, Houston, Los Angeles and San Diego metro areas. Reach us from the refrigerator service page or at (844) 972-4767, quoting the code and your model and serial numbers.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Sub-Zero appliance?
Book a specialist visit for a clear estimate and approval before any repair.