Code 20 2 06 is a mis-wired defrost bi-metal; Designer units add an overheat condition.
Model compatibility: Sub-Zero reused visible code strings across series and model years, so 20 2 06 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Code 20 2 06 means a mis-wired bi-metal, with overheat on Designer units.
When 20 2 06 appears, the unit is reporting a mis-wired bi-metal in the defrost system. Wording depends on the series.
At a glance
Code
20 2 06
What it means
Code 20 2 06 means a mis-wired bi-metal, with overheat on Designer units.
What you can check
Turn the home circuit breaker to the unit off for half a minute, switch it back on, and watch how the unit runs.
When to call a technician
Persisting after the reset, this code calls for a service visit. A wiring fault in the defrost system is not something to chase yourself.
Series
Stated meaning
Classic (formerly Built-In, BI), the older built-in line
Mis-wired bi-metal
Designer (formerly Integrated)
Defrost bi-metal mis-wire with overheat
Reset, then retest
For both series: turn the home circuit breaker to the unit off for half a minute, back on, and see how the unit runs. If the code persists, book service.
Technicians can take a Sub-Zero refrigerator call in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 972-4767 or open refrigerator repair, with the code, model and serial number and the result of the reset to hand.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Sub-Zero appliance?
Book a specialist visit for a clear estimate and approval before any repair.