Skip to content
Sub-Zero appliance repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Sub-Zero Refrigerator Error Code 20 2 00: Defrost Bi-Metal Stuck Open

Error code 20 2 00
Appliance Refrigerator
Quick answer

On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.

Model compatibility: Sub-Zero reused visible code strings across series and model years, so 20 2 00 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Code 20 2 00 means the defrost bi-metal is stuck open.

A three-part code of 20 2 00 on a Sub-Zero refrigerator or freezer points at the defrost system. The meaning: the defrost bi-metal is stuck open.

At a glance

Code 20 2 00
What it means Code 20 2 00 means the defrost bi-metal is stuck open.
What you can check Switch off the home circuit breaker serving the unit, leave it off for 30 seconds, switch it on again, and see whether the unit operates normally.
When to call a technician When the code comes back, arrange a service visit so a technician can check the defrost system.

Series it appears on

Two lines list it: the Classic Series, formerly Built-In (BI), which is the older built-in line, and the Designer Series, formerly Integrated.

The owner step

  1. Switch off the home circuit breaker serving the unit.
  2. Leave it off for 30 seconds, then switch it on again.
  3. Watch the unit and see whether it operates normally.

If the code comes back, book service.

  • 20 2 01: the same bi-metal reported as stuck closed instead of open.
  • 20 2 50: the defrost heater is reported open.
  • EC20: defrost underheat with no voltage feedback through the gray/white wire at defrost start.

Defrost service across our metro areas

For a Sub-Zero refrigerator in the Miami, New York, Houston, Los Angeles or San Diego metro areas, start on the refrigerator repair page or phone (844) 972-4767. Keep the code, the model and serial numbers, and a note that you already cycled the breaker.

Source: Sub-Zero owner support: Classic (BI) Series error codes; Sub-Zero owner support: Designer (Integrated) Series error codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Sub-Zero appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Sub-Zero appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Sub-Zero appliance repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.

Request your repair

Fields marked with * are required.

Call Schedule a visit