Sub-Zero Wine Storage Error Code 10 C 00: Condenser Thermistor Open
10 C 00 reports an open condenser thermistor; a 30-second breaker reset and retest is the listed step.
Sub-Zero IT-36CIID over-and-under refrigerator-freezer — model notes, common issues and what to have ready before booking.
An over-and-under combination with an ice maker and internal dispenser benefits from a few basic checks first. Look at the floor under the cabinet for water, and see whether the cubes are small, hollow or cloudy. Check whether the bin has frozen together and whether ice is still being produced. Note whether the dispenser runs and whether the compressor is louder than before. The Sub-Zero IT-36CIID is an older model that is still worth repairing. Describe the bin and the cubes in the words you would use at home. Households across the cities we serve should enter the model number IT-36CIID and these checks in the booking form.
| Model | IT-36CIID |
|---|---|
| Appliance | 36-inch combination refrigerator-freezer |
| Common symptoms | Small, hollow or cloudy cubes, a bin frozen together, stopped ice, water on the floor, a louder compressor. |
| What you can check | Look at the floor for water and at the cubes. Check whether the bin froze together, whether ice is still produced, whether the dispenser runs and whether the compressor is louder. |
| When to call a technician | Arrange a technician visit if ice stops, the dispenser fails to run, water reaches the floor or the compressor stays louder. Describe the bin and cubes in everyday words. |
IT-36CIID is a Sub-Zero 36″ over-and-under refrigerator-freezer (combination, ice maker, internal dispenser). It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note whether the water supply was recently changed and how long production has been slow.
10 C 00 reports an open condenser thermistor; a 30-second breaker reset and retest is the listed step.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 1 00 reports an open zone 1 evaporator fan. Cycle the breaker and retest before calling.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note whether the water supply was recently changed and how long production has been slow.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.