Sub-Zero Wine Storage Error Code 10 0 00
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Sub-Zero ID-36RP refrigerator drawers — model notes, common issues and what to have ready before booking.
Daily use of this older Pro-handle drawer wears on it steadily, but the ID-36RP is still worth repairing when its seal and gasket get attention early. A Sub-Zero unit opened many times a day puts ongoing strain on the door seal, and a gap there can keep the compressor running nonstop while the fresh-food side stays warm. Water inside the cabinet and a door that does not close fully are the next signs to note. Describe how the drawer is used from day to day, since that routine often explains the pattern. Homes in the Miami, New York, Houston, Los Angeles and San Diego metro areas can pass that along with the ID-36RP number on the form.
| Model | ID-36RP |
|---|---|
| Appliance | 36-inch Pro-handle refrigerator drawers |
| Common symptoms | strained door seal, compressor running nonstop, warm fresh-food side, water inside the cabinet, door not closing fully |
| What you can check | Check the seal and gasket early and describe how the drawer is used day to day. Note any water inside the cabinet and whether the door closes fully. |
| When to call a technician | With a warm fresh-food side and a nonstop compressor, or a door that will not close fully, a technician should look. This older Pro-handle unit is still worth repairing. |
ID-36RP is a Sub-Zero 36″ refrigerator drawers (Pro handle). It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Code 15 4 00 reports the defrost relay stuck open on Designer, Classic BI and Classic CL units.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 3 33 reports a zone 3 fan speed set too low. A breaker reset and retest is the owner step.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 01 flags a short in the refrigerator light circuit on Classic (BI) and Classic (CL) units. Try a 30-second breaker reset.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.