Sub-Zero Wine Storage Error Code 10 0 00
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Sub-Zero ID-36R refrigerator drawers — model notes, common issues and what to have ready before booking.
Drawers that open all day wear differently from a door that opens a few times a meal, and a 36-inch Sub-Zero ID-36R sees that steady traffic. Each opening lets warm kitchen air in and asks the cabinet to recover, so the drawer gasket and the fresh-food section work hard across a busy week. Over months, a seal that has stiffened may leave a gap that keeps the compressor running without stopping. Water that collects inside the cabinet or a temperature display that does not match the air can follow the same pattern. Customers in the Miami, New York, Houston, Los Angeles and San Diego metro areas should note their typical usage and enter the ID-36R in the booking form.
| Model | ID-36R |
|---|---|
| Appliance | 36-inch refrigerator drawers |
| Common symptoms | stiffened drawer gasket, compressor running without stopping, water inside the cabinet, display not matching the air |
| What you can check | Note how you typically use the drawers and look at the gasket for a gap. Enter the model number from the rating label on the booking form. |
| When to call a technician | A compressor that runs without stopping, or water collecting inside the cabinet, justifies a service visit. A seal that has stiffened may need replacing. |
ID-36R is a Sub-Zero 36″ refrigerator drawers. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Code 15 4 00 reports the defrost relay stuck open on Designer, Classic BI and Classic CL units.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 3 33 reports a zone 3 fan speed set too low. A breaker reset and retest is the owner step.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 01 flags a short in the refrigerator light circuit on Classic (BI) and Classic (CL) units. Try a 30-second breaker reset.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.