Sub-Zero Wine Storage Error Code 10 0 00
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Sub-Zero ID-36CI refrigerator/freezer drawers — model notes, common issues and what to have ready before booking.
The ice side of a 36-inch combination drawer with an ice maker works on its own water path, which is why a technician separates it from the cooling side early on. On a Sub-Zero ID-36CI, a slow batch of cubes or a bin that has refrozen into one block points toward the water supply, the fill or the freeze cycle. Water that gathers at the base is a different concern and often traces to a drain. Small, hollow or cloudy cubes call for a closer look at the water and the freezing process. Owners in the Miami, New York, Houston, Los Angeles and San Diego metro areas should record the ID-36CI, the ice symptom and any water seen on the floor in the booking form.
| Model | ID-36CI |
|---|---|
| Appliance | 36-inch combination drawers with ice maker |
| Common symptoms | slow batches of cubes, bin refrozen into one block, water at the base, small hollow or cloudy cubes |
| What you can check | Record the ice symptom and any water seen on the floor. Note whether the water supply was recently changed and how long production has been slow. |
| When to call a technician | Cubes that stay slow or cloudy, or water that keeps gathering at the base, should be seen by a technician. The water supply, fill, freeze cycle or drain needs testing. |
ID-36CI is a Sub-Zero 36″ refrigerator/freezer drawers (combination, ice maker). The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note whether the water supply was recently changed and how long production has been slow.
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Code 15 4 00 reports the defrost relay stuck open on Designer, Classic BI and Classic CL units.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 3 33 reports a zone 3 fan speed set too low. A breaker reset and retest is the owner step.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 01 flags a short in the refrigerator light circuit on Classic (BI) and Classic (CL) units. Try a 30-second breaker reset.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note whether the water supply was recently changed and how long production has been slow.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.