Sub-Zero Wine Storage Error Code 10 0 00
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Sub-Zero ID-30FI freezer drawers with ice maker — model notes, common issues and what to have ready before booking.
Before you call about a 30-inch Sub-Zero ID-30FI, check the ice bin by eye. Look for a block of cubes that has merged into one mass, which points to melting and refreezing, and look for cubes that appear cloudy, small or hollow. Confirm that the water supply valve is open and that no water sits at the base of the freezer. Those quick observations give a technician a clear starting point. Do not pull the bin apart or reach into the water line, because the ice system has parts that need professional handling. Customers across the Miami, New York, Houston, Los Angeles and San Diego metro areas should type the ID-30FI and these observations into the booking form.
| Model | ID-30FI |
|---|---|
| Appliance | 30-inch freezer drawers with ice maker |
| Common symptoms | ice merged into one block, cloudy small or hollow cubes, water at the base of the freezer |
| What you can check | Look at the ice bin for cubes merged into one mass, and confirm the water supply valve is open. Check that no water sits at the base of the freezer. |
| When to call a technician | Do not pull the bin apart or reach into the water line. Book a technician, because the ice system has parts needing professional handling. |
ID-30FI is a Sub-Zero 30″ freezer drawers with ice maker. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note whether the water supply was recently changed and how long production has been slow.
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Code 15 4 00 reports the defrost relay stuck open on Designer, Classic BI and Classic CL units.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 3 33 reports a zone 3 fan speed set too low. A breaker reset and retest is the owner step.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 01 flags a short in the refrigerator light circuit on Classic (BI) and Classic (CL) units. Try a 30-second breaker reset.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note whether the water supply was recently changed and how long production has been slow.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.