Sub-Zero Wine Storage Error Code 10 0 00
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Sub-Zero ID-30C refrigerator/freezer drawers — model notes, common issues and what to have ready before booking.
Combination drawer units split a refrigerated section and a freezer section into one tall installation, and a 30-inch Sub-Zero ID-30C may share airflow and controls between the two. Because one sealed system often serves both sides, a symptom on the freezer can have a root in the refrigerated section, and the other way around. A compressor that runs without stopping, frost building in the freezer, or a fresh-food drawer that stays warm would each lead a technician to check the airflow path first. If an ice maker is present, that branch is handled separately because it uses its own water line. Customers in the Miami, New York, Houston, Los Angeles and San Diego metro areas should record which drawer is affected and the ID-30C model number in the booking form.
| Model | ID-30C |
|---|---|
| Appliance | 30-inch combination refrigerator-freezer drawers |
| Common symptoms | compressor never stopping, freezer frost, warm fresh-food drawer, ice maker handled on its own water line |
| What you can check | Record which drawer is affected and the model number. Note whether the freezer side or refrigerated side shows trouble first, since they share one sealed system. |
| When to call a technician | A compressor that never stops, building frost or a warm drawer means a technician is needed. Airflow between the two sections is checked first and needs hands-on testing. |
ID-30C is a Sub-Zero 30″ refrigerator/freezer drawers (combination). The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Code 15 4 00 reports the defrost relay stuck open on Designer, Classic BI and Classic CL units.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 3 33 reports a zone 3 fan speed set too low. A breaker reset and retest is the owner step.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 01 flags a short in the refrigerator light circuit on Classic (BI) and Classic (CL) units. Try a 30-second breaker reset.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.