Sub-Zero Wine Storage Error Code 10 0 00
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Sub-Zero ID-27R refrigerator drawers — model notes, common issues and what to have ready before booking.
Owners who cook often and entertain at home tend to rely on a 27-inch drawer refrigerator for ingredients that need to stay within reach, so a drop in performance is noticed fast. On a Sub-Zero ID-27R, the usual suspects include a drawer gasket that is not closing cleanly, a display that disagrees with the actual cabinet temperature and water that appears at the base. Compressor or fan noise that keeps going can also be a sign that the cabinet is struggling to keep up. Households in the Miami, New York, Houston, Los Angeles and San Diego metro areas help most by stating the ID-27R, the drawer affected and the first change they saw on the booking form.
| Model | ID-27R |
|---|---|
| Appliance | 27-inch refrigerator drawers |
| Common symptoms | drawer gasket not closing cleanly, display disagreeing with cabinet temperature, water at the base, continuous compressor or fan noise |
| What you can check | State the drawer affected and the first change you saw, and look at whether the gasket closes cleanly. Record the model number from the rating label. |
| When to call a technician | Noise that keeps going, or water that continues to appear at the base, should be seen by a technician. A cabinet struggling to keep up needs diagnosis. |
ID-27R is a Sub-Zero 27″ refrigerator drawers. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Code 15 4 00 reports the defrost relay stuck open on Designer, Classic BI and Classic CL units.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 3 33 reports a zone 3 fan speed set too low. A breaker reset and retest is the owner step.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 01 flags a short in the refrigerator light circuit on Classic (BI) and Classic (CL) units. Try a 30-second breaker reset.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.