Sub-Zero Wine Storage Error Code 10 0 00
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Sub-Zero ID-24R refrigerator drawers — model notes, common issues and what to have ready before booking.
Before booking a visit, a few checks at home can make the call more useful. Make sure the thermostat setting is where you expect, and look at the drawer gasket for debris or a gap that prevents a clean seal. Listen for a compressor or fan that runs without stopping, and notice whether the fresh-food section stays warm even when the setting is correct. Avoid opening panels or disconnecting parts on a Sub-Zero ID-24R, because the cooling system is sealed and the drawer needs a professional’s access. For the Miami, New York, Houston, Los Angeles and San Diego metro areas, the booking form should state the symptom, the model number ID-24R and whether water has been seen.
| Model | ID-24R |
|---|---|
| Appliance | 24-inch refrigerator drawers |
| Common symptoms | fresh-food section staying warm with correct setting, compressor or fan running without stopping, drawer gasket gap, water |
| What you can check | Make sure the thermostat setting is where you expect and look at the drawer gasket for debris or a gap. Listen for a compressor or fan that never stops. |
| When to call a technician | Do not open panels or disconnect parts yourself. Book a technician, since the cooling system is sealed and the drawer needs professional access. |
ID-24R is a Sub-Zero 24″ refrigerator drawers. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Code 15 4 00 reports the defrost relay stuck open on Designer, Classic BI and Classic CL units.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 3 33 reports a zone 3 fan speed set too low. A breaker reset and retest is the owner step.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 01 flags a short in the refrigerator light circuit on Classic (BI) and Classic (CL) units. Try a 30-second breaker reset.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.