Sub-Zero Wine Storage Error Code 10 0 00
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Sub-Zero ID-24FI freezer drawers with ice maker — model notes, common issues and what to have ready before booking.
Households that add an ice maker to a drawer freezer usually rely on it for daily drinks, so a slow batch or a bin that has frozen into one mass gets noticed quickly. On a 24-inch Sub-Zero ID-24FI, the ice system depends on a steady water supply, a working fill path and a cold bin that stays clear of melt. Water pooling at the base can come from a drain that has backed up, and cubes that come out small, hollow or cloudy often point to water quality or the freeze cycle. Owners in the Miami, New York, Houston, Los Angeles and San Diego metro areas should note how long ice has been slow, whether the bin is refreezing, and which of these signs appeared first in the booking form, along with the ID-24FI.
| Model | ID-24FI |
|---|---|
| Appliance | 24-inch freezer drawers with ice maker |
| Common symptoms | slow ice batches, bin frozen into one mass, small hollow or cloudy cubes, water pooling at the base |
| What you can check | Note how long ice has been slow and whether the bin is refreezing. Also note whether the water supply was recently changed, and which sign appeared first. |
| When to call a technician | Ice that stays slow, or water that keeps pooling at the base, is a case for a technician. A backed-up drain or the freeze cycle needs testing. |
ID-24FI is a Sub-Zero 24″ freezer drawers with ice maker. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note whether the water supply was recently changed and how long production has been slow.
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Code 15 4 00 reports the defrost relay stuck open on Designer, Classic BI and Classic CL units.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 3 33 reports a zone 3 fan speed set too low. A breaker reset and retest is the owner step.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 01 flags a short in the refrigerator light circuit on Classic (BI) and Classic (CL) units. Try a 30-second breaker reset.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note whether the water supply was recently changed and how long production has been slow.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.