Sub-Zero Wine Storage Error Code 10 C 00: Condenser Thermistor Open
10 C 00 reports an open condenser thermistor; a 30-second breaker reset and retest is the listed step.
Sub-Zero IC-24FI column freezer with ice maker — model notes, common issues and what to have ready before booking.
When a technician comes out to a 24-inch column freezer with an ice maker, the first questions are usually about the ice itself. What does the cube look like, is it small, hollow or cloudy, and has the bin frozen into one mass? Then ask about water: is there any pooling at the base, and when did you first notice it? The Sub-Zero IC-24FI is an older model still worth repairing. Writing down the timing and the appearance of the ice gives the technician a clear starting point. Customers across our coverage area should add IC-24FI and those answers to the booking form.
| Model | IC-24FI |
|---|---|
| Appliance | 24-inch column freezer with ice maker |
| Common symptoms | Small, hollow or cloudy cubes, a bin frozen into one mass, water pooling at the base. |
| What you can check | Note what the cubes look like, whether the bin has frozen together, whether water pools at the base and when you first noticed it. |
| When to call a technician | Book a service visit if the ice stays small, hollow or cloudy, or water keeps pooling at the base. The timing and appearance of the ice give a clear starting point. |
IC-24FI is a Sub-Zero 24″ column freezer with ice maker. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note whether the water supply was recently changed and how long production has been slow.
10 C 00 reports an open condenser thermistor; a 30-second breaker reset and retest is the listed step.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 1 00 reports an open zone 1 evaporator fan. Cycle the breaker and retest before calling.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note whether the water supply was recently changed and how long production has been slow.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.