Sub-Zero Wine Storage Error Code 10 C 00: Condenser Thermistor Open
10 C 00 reports an open condenser thermistor; a 30-second breaker reset and retest is the listed step.
Sub-Zero IC-18FI column freezer with ice maker — model notes, common issues and what to have ready before booking.
Ice production in a narrow 18-inch column freezer depends on a steady supply of water and a bin that stays cold enough to keep cubes separate. Daily use changes both: every time the bin is emptied or the door opens, the ice maker has to rebuild its supply. The Sub-Zero IC-18FI is an older model still worth repairing. Watch for cubes that come out small or cloudy, slow output, water collecting at the base and a bin that refreezes into one mass. Customers across the metro areas we serve should record those patterns and enter the model number IC-18FI in the booking form.
| Model | IC-18FI |
|---|---|
| Appliance | 18-inch column freezer with ice maker |
| Common symptoms | Small or cloudy cubes, slow ice output, water collecting at the base, a bin that refreezes into one mass. |
| What you can check | Watch the cubes, the output rate, the base for water and the bin. Record those patterns and read the model number from the rating label. |
| When to call a technician | If ice stays small or cloudy, output remains slow or water gathers at the base, book a service visit. Send your recorded patterns along. |
IC-18FI is a Sub-Zero 18″ column freezer with ice maker. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note whether the water supply was recently changed and how long production has been slow.
10 C 00 reports an open condenser thermistor; a 30-second breaker reset and retest is the listed step.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 1 00 reports an open zone 1 evaporator fan. Cycle the breaker and retest before calling.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note whether the water supply was recently changed and how long production has been slow.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.