Code 50 U 87 reports that the water flow meter did not detect flow on Classic (BI) series units.
Model compatibility: Sub-Zero reused visible code strings across series and model years, so 50 U 87 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
The water flow meter did not detect flow.
When a Sub-Zero refrigerator or freezer shows 50 U 87, the control is reporting that the water flow meter did not detect any flow. The code applies to the Classic series, which Sub-Zero formerly called the Built-In (BI) series, so it is the older built-in line.
At a glance
Code
50 U 87
What it means
The water flow meter did not detect flow.
What you can check
Switch the home breaker feeding the unit off, wait 30 seconds, switch it back on, and retest operation.
When to call a technician
Expect to need a technician if the code returns after the reset; book a service visit and note that the breaker reset was tried.
Try a power reset first
Switch the home circuit breaker that feeds the unit off, wait 30 seconds, switch it back on, and retest operation.
If 50 U 87 returns
If the code comes back after the reset, book service.
Water-related codes to compare
50 U 80: the water flow meter was not detected at all, a different report from no flow.
50 U 86: the meter detected low flow rather than none.
40 8 40: the ice maker ran for the maximum fill time without reaching the necessary volume.
Sub-Zero refrigerator service in our metro areas
For a Sub-Zero refrigerator that keeps showing 50 U 87 in the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 972-4767 or open the refrigerator repair page. Have the code, the model and serial number, and a note that the breaker reset was tried ready.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Sub-Zero appliance?
Book a specialist visit for a clear estimate and approval before any repair.