On the older Classic (BI) built-in series, 40 8 40 means the ice maker hit its maximum fill time without enough water volume.
Model compatibility: Sub-Zero reused visible code strings across series and model years, so 40 8 40 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
On Classic (formerly Built-In, BI) units, 40 8 40 means the ice maker ran for its maximum fill time without reaching the necessary volume.
Code 40 8 40 belongs to the ice maker. It is stored when the ice maker runs for its maximum fill time and still does not reach the volume it needs.
At a glance
Code
40 8 40
What it means
On Classic (formerly Built-In, BI) units, 40 8 40 means the ice maker ran for its maximum fill time without reaching the necessary volume.
What you can check
Turn off the home circuit breaker that feeds the unit and wait 30 seconds. Switch it back on and check whether the unit runs normally.
When to call a technician
A code that returns after the reset calls for a technician, so book an ice maker service visit and mention whether the reset changed anything.
Which units use it
The code is listed for the Classic Series, formerly called Built-In (BI). This is the older built-in line.
What to try
Turn off the home circuit breaker that feeds the unit and wait 30 seconds. Switch it back on and check whether the unit runs normally. A code that returns after the reset calls for a technician.
Nearby ice maker codes
30 8 05: the control gets no signal from the ice maker for a fill.
Our Sub-Zero visits cover the Miami, New York, Houston, Los Angeles and San Diego metro areas. Book through refrigerator repair or call (844) 972-4767, and note the full code, the model number and whether the breaker reset changed anything.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Sub-Zero appliance?
Book a specialist visit for a clear estimate and approval before any repair.