Sub-Zero Wine Storage Error Code 10 C 00: Condenser Thermistor Open
10 C 00 reports an open condenser thermistor; a 30-second breaker reset and retest is the listed step.
Sub-Zero IT-30RID over-and-under refrigerator-freezer with internal dispenser — model notes, common issues and what to have ready before booking.
In an over-and-under refrigerator-freezer with an internal dispenser, the freezer and the refrigerator section are stacked, so airflow between them matters. When the freezer frosts while the fresh-food section drifts warm, the air path is often the first suspect. Dispenser trouble adds a second, separate system to check. The Sub-Zero IT-30RID is an older model that is still worth repairing. Note which section changed first, whether the dispenser has stopped and whether the compressor runs longer than before. Mention when the dispenser last worked as expected. Households in the metro areas we cover should record the model number IT-30RID with those notes in the booking form.
| Model | IT-30RID |
|---|---|
| Appliance | 30-inch refrigerator with internal dispenser |
| Common symptoms | Freezer frost with a warm fresh-food section, a stopped dispenser, compressor running longer. |
| What you can check | Note which section changed first, whether the dispenser has stopped and whether the compressor runs longer than before. Mention when the dispenser last worked as expected. |
| When to call a technician | Frost in the freezer with a warm refrigerator section often traces to airflow, and a stopped dispenser is a second system. Book a technician and share the order of events. |
IT-30RID is a Sub-Zero 30″ over-and-under refrigerator-freezer with internal dispenser. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 C 00 reports an open condenser thermistor; a 30-second breaker reset and retest is the listed step.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 1 00 reports an open zone 1 evaporator fan. Cycle the breaker and retest before calling.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.