Sub-Zero Wine Storage Error Code 10 C 00: Condenser Thermistor Open
10 C 00 reports an open condenser thermistor; a 30-second breaker reset and retest is the listed step.
Sub-Zero IT-30CIID over-and-under refrigerator-freezer — model notes, common issues and what to have ready before booking.
Start with the ice, then the water. On an over-and-under combination with an ice maker and internal dispenser, a technician’s first question is usually which function stopped, so have that answer ready. Note whether the cubes come out small, hollow or cloudy, whether the bin has frozen into one solid block and whether any ice has appeared in the past day. Next, mention any puddle at the base of the cabinet and the date it first showed up. The Sub-Zero IT-30CIID is an older model still worth repairing, and a short written timeline keeps the visit focused on the cause rather than on guesswork. Add IT-30CIID and that timeline to the booking form.
| Model | IT-30CIID |
|---|---|
| Appliance | 30-inch combination refrigerator-freezer |
| Common symptoms | Small, hollow or cloudy cubes, a bin frozen into a solid block, no ice for a day, a puddle at the base. |
| What you can check | Decide which function stopped first. Note the cube condition, whether the bin froze solid, whether any ice appeared in the past day and when a puddle first showed. |
| When to call a technician | Book a technician if ice has stopped, the bin stays frozen solid or water keeps puddling at the base. A short written timeline keeps the visit on the cause. |
IT-30CIID is a Sub-Zero 30″ over-and-under refrigerator-freezer (combination, ice maker, internal dispenser). It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note whether the water supply was recently changed and how long production has been slow.
10 C 00 reports an open condenser thermistor; a 30-second breaker reset and retest is the listed step.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 1 00 reports an open zone 1 evaporator fan. Cycle the breaker and retest before calling.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note whether the water supply was recently changed and how long production has been slow.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.