Sub-Zero Wine Storage Error Code 10 C 00: Condenser Thermistor Open
10 C 00 reports an open condenser thermistor; a 30-second breaker reset and retest is the listed step.
Sub-Zero IC-30R column refrigerator — model notes, common issues and what to have ready before booking.
Have the door and fresh-food details ready for a 30-inch column refrigerator before the technician asks. Say whether the door seal looks worn, whether the cabinet feels warmer than the setting and whether the display reads what the interior seems to be. Mention any compressor noise that is new. The Sub-Zero IC-30R is an older model still worth repairing. A written note on each of these points is more helpful than a general description. Also note whether any drawers have been removed or rearranged recently. Households in the metro areas we cover should enter the model number IC-30R and the notes in the booking form.
| Model | IC-30R |
|---|---|
| Appliance | 30-inch column refrigerator |
| Common symptoms | Worn door seal, cabinet warmer than the setting, display that disagrees with the interior, new compressor noise. |
| What you can check | Say whether the seal looks worn, whether the cabinet feels warmer than set and whether the display matches the interior. Also note if drawers were recently removed or rearranged. |
| When to call a technician | Book a technician if the cabinet stays warmer than the setting or the compressor noise remains new. A written note on each point helps more than a general description. |
IC-30R is a Sub-Zero 30″ column refrigerator. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 C 00 reports an open condenser thermistor; a 30-second breaker reset and retest is the listed step.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 1 00 reports an open zone 1 evaporator fan. Cycle the breaker and retest before calling.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.