Sub-Zero Wine Storage Error Code 10 C 00: Condenser Thermistor Open
10 C 00 reports an open condenser thermistor; a 30-second breaker reset and retest is the listed step.
Sub-Zero IC-24R column refrigerator — model notes, common issues and what to have ready before booking.
People who choose a 24-inch column refrigerator usually want a single tall cabinet for fresh food without a freezer section, and they tend to notice a problem at the door first: a seal that no longer grips or a display that reads differently from the cabinet’s feel. Those owners are often the first to hear a compressor that runs more than before. The Sub-Zero IC-24R is an older model still worth repairing. Write down the door condition, the display reading and any change in noise. Owners in the metro areas we serve can enter the model number IC-24R with those notes in the booking form.
| Model | IC-24R |
|---|---|
| Appliance | 24-inch column refrigerator |
| Common symptoms | Door seal that no longer grips, display reading that differs from how the cabinet feels, compressor running more than before. |
| What you can check | Write down the door condition, the display reading and any change in noise. Look at whether the seal still grips. |
| When to call a technician | A worn seal, a display that disagrees with the cabinet or a compressor that runs more than before is worth a technician visit. Bring your notes. |
IC-24R is a Sub-Zero 24″ column refrigerator. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 C 00 reports an open condenser thermistor; a 30-second breaker reset and retest is the listed step.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 1 00 reports an open zone 1 evaporator fan. Cycle the breaker and retest before calling.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.