Sub-Zero Wine Storage Error Code 10 0 00
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Sub-Zero ID-36C refrigerator/freezer drawers — model notes, common issues and what to have ready before booking.
Frost in the freezer section is often the first thing an owner sees on a 36-inch combination drawer, and on a Sub-Zero ID-36C it deserves a look before the ice system is blamed. A freezer that frosts can reflect a door gasket that leaks warm air, a defrost system that is not clearing ice, or a compressor that is struggling to hold temperature. Ice maker trouble and water at the base are separate concerns when a unit includes that feature. A compressor that runs louder than usual is worth reporting too. Households in the Miami, New York, Houston, Los Angeles and San Diego metro areas should add the ID-36C and when the frost first appeared to the booking form.
| Model | ID-36C |
|---|---|
| Appliance | 36-inch combination refrigerator-freezer drawers |
| Common symptoms | freezer frost, leaking door gasket, defrost not clearing ice, struggling or louder compressor, ice maker trouble, water at the base |
| What you can check | Note when the frost first appeared, and listen for a compressor that runs louder than usual. Record the model number from the rating label. |
| When to call a technician | Frost that keeps returning calls for a technician, since a leaky gasket, defrost fault or struggling compressor can be behind it. Report ice and water issues too. |
ID-36C is a Sub-Zero 36″ refrigerator/freezer drawers (combination). The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Code 15 4 00 reports the defrost relay stuck open on Designer, Classic BI and Classic CL units.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 3 33 reports a zone 3 fan speed set too low. A breaker reset and retest is the owner step.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 01 flags a short in the refrigerator light circuit on Classic (BI) and Classic (CL) units. Try a 30-second breaker reset.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.