Sub-Zero Wine Storage Error Code 10 0 00
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Sub-Zero ID-30R refrigerator drawers — model notes, common issues and what to have ready before booking.
Thirty inches of drawer refrigeration gives one cabinet a lot of cold air to move, and that size shapes how a technician approaches a Sub-Zero ID-30R. The first question is whether the fresh-food side is struggling to hold its setting or whether the cabinet only runs hot when the door is opened. Display readings that do not match the inside, a seal that will not close fully and a compressor that runs nonstop often sit close together in the diagnosis. Listing the ID-30R and whether the trouble is constant or occasional helps the technician plan. Customers in the Miami, New York, Houston, Los Angeles and San Diego metro areas can include both points on the booking form.
| Model | ID-30R |
|---|---|
| Appliance | 30-inch refrigerator drawers |
| Common symptoms | fresh-food side not holding setting, cabinet hot when opened, display disagreeing with inside, seal not closing fully, nonstop compressor |
| What you can check | Work out whether the trouble is constant or occasional, and whether the cabinet only runs hot when the door is opened. Record the model number from the rating label. |
| When to call a technician | A seal that will not close fully, or a compressor that runs nonstop, is a reason for a technician. These signs often sit together and need proper diagnosis. |
ID-30R is a Sub-Zero 30″ refrigerator drawers. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Code 15 4 00 reports the defrost relay stuck open on Designer, Classic BI and Classic CL units.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 3 33 reports a zone 3 fan speed set too low. A breaker reset and retest is the owner step.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 01 flags a short in the refrigerator light circuit on Classic (BI) and Classic (CL) units. Try a 30-second breaker reset.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.