Sub-Zero Wine Storage Error Code 10 0 00
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Sub-Zero ID-30CI refrigerator/freezer drawers — model notes, common issues and what to have ready before booking.
Cloudy or hollow cubes are usually the first sign that something is off in a combination drawer with an ice maker, and on a 30-inch Sub-Zero ID-30CI they are worth reporting before anything else. Cube quality tends to follow the water supply and the freeze cycle, while a slow ice output can point to a fill valve, a blocked line or a bin that has begun to refreeze. Water at the base is a separate concern that often traces to a drain. A refrigerated drawer that stays warm would belong to a different branch of the diagnosis. Owners in the Miami, New York, Houston, Los Angeles and San Diego metro areas should record the ID-30CI, the cube appearance and when the change started in the booking form.
| Model | ID-30CI |
|---|---|
| Appliance | 30-inch combination drawers with ice maker |
| Common symptoms | cloudy or hollow cubes, slow ice output, refreezing bin, water at the base, warm refrigerated drawer |
| What you can check | Record the cube appearance and when the change started. Note any water at the base, and whether the water supply was recently changed. |
| When to call a technician | Cubes that stay cloudy or slow, or water returning at the base, are time for a technician. A fill valve, blocked line or drain needs testing. |
ID-30CI is a Sub-Zero 30″ refrigerator/freezer drawers (combination, ice maker). The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note whether the water supply was recently changed and how long production has been slow.
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Code 15 4 00 reports the defrost relay stuck open on Designer, Classic BI and Classic CL units.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 3 33 reports a zone 3 fan speed set too low. A breaker reset and retest is the owner step.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 01 flags a short in the refrigerator light circuit on Classic (BI) and Classic (CL) units. Try a 30-second breaker reset.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note whether the water supply was recently changed and how long production has been slow.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.