Sub-Zero Wine Storage Error Code 10 0 00
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Sub-Zero ID-24RO outdoor refrigerator drawers — model notes, common issues and what to have ready before booking.
Outdoors, a refrigerator drawer faces weather, sun and temperature swings that an indoor model never sees, so everyday use plays out differently. On a 24-inch Sub-Zero ID-24RO the door seal and drawer gasket take the most stress, and grit or humidity can keep a seal from closing fully. Compressor and fan noise may grow louder during hot afternoons as the unit works harder to hold its setting. A display that does not match the actual cabinet temperature is worth noting along with any water that gathers in the base. Owners in the Miami, New York, Houston, Los Angeles and San Diego metro areas should write the ID-24RO, the season the trouble began and whether it follows the heat on the booking form.
| Model | ID-24RO |
|---|---|
| Appliance | 24-inch outdoor refrigerator drawers |
| Common symptoms | seal not closing fully from grit or humidity, louder compressor and fan on hot afternoons, display mismatch, water in the base |
| What you can check | Write down the season the trouble began and whether it follows the heat. Check the door seal and drawer gasket for grit, and note any water in the base. |
| When to call a technician | If the display keeps disagreeing with the cabinet temperature or water keeps gathering in the base, a technician should visit. Weather wear on seals needs inspection. |
ID-24RO is a Sub-Zero 24″ outdoor refrigerator drawers. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Code 15 4 00 reports the defrost relay stuck open on Designer, Classic BI and Classic CL units.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 3 33 reports a zone 3 fan speed set too low. A breaker reset and retest is the owner step.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 01 flags a short in the refrigerator light circuit on Classic (BI) and Classic (CL) units. Try a 30-second breaker reset.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.