Sub-Zero Wine Storage Error Code 10 0 00
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Sub-Zero ID-24F freezer drawers — model notes, common issues and what to have ready before booking.
Drawer freezers tend to be used in short, frequent bursts, so the drawers open and close far more than a conventional door. On a 24-inch Sub-Zero ID-24F, a technician will look first at the drawer gasket and the evaporator airflow, since a freezer that frosts or runs louder than usual often traces to those. Water under the cabinet can come from a defrost drain or a loose supply line, and an ice maker that has stopped is a separate branch to describe. Good notes help: which drawer is affected, whether the compressor runs without stopping, and when frost first appeared. Households in the Miami, New York, Houston, Los Angeles and San Diego metro areas should add the ID-24F and those observations to the booking form.
| Model | ID-24F |
|---|---|
| Appliance | 24-inch freezer drawers |
| Common symptoms | freezer frost, louder-than-usual running, water under the cabinet, ice maker stopped, compressor never stopping |
| What you can check | Note which drawer is affected, whether the compressor runs without stopping, and when frost first appeared. Check the drawer gasket and record the model number. |
| When to call a technician | Frost that keeps forming, or water returning under the cabinet, needs a technician. Defrost drain, supply line and evaporator airflow checks take hands-on work. |
ID-24F is a Sub-Zero 24″ freezer drawers. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 0 00 on Designer (formerly Integrated) wine storage points to an unprogrammed replacement control board or an open thermistor on a DEFL-configured model.
Code 15 4 00 reports the defrost relay stuck open on Designer, Classic BI and Classic CL units.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
Code 30 8 05 reports no ice maker fill signal on Classic (BI) and a missing water valve in signal on Designer units.
35 3 33 reports a zone 3 fan speed set too low. A breaker reset and retest is the owner step.
Code 40 1 00 flags a Zone 1 stepper current fault on Designer wine storage and Designer (Integrated) units.
45 1 01 flags a short in the refrigerator light circuit on Classic (BI) and Classic (CL) units. Try a 30-second breaker reset.
Code 90 5 80 means no keypad communications on Classic (formerly BI) Series units; reset the breaker for 30 seconds.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.