Sub-Zero Refrigerator Error Code 10 1 00: Cabinet Thermistor Open
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero BI-48S side-by-side refrigerator — model notes, common issues and what to have ready before booking.
A 48-inch side-by-side is a wide cabinet, and the two sections share one cooling system, so a fault in one half can show up as a change in the other. The Sub-Zero BI-48S is an older model still worth repairing. When the compressor works harder, the freezer may frost or the fresh-food side may drift warm, and water near the base can appear. Describe which half changed first, whether the ice maker, if fitted, has slowed and how the compressor sounds compared with its usual pattern. These notes are most useful when they are specific. Households in the metro areas we serve should enter the model number BI-48S with them in the booking form.
| Model | BI-48S |
|---|---|
| Appliance | 48-inch side-by-side refrigerator |
| Common symptoms | Freezer frost, drifting warm fresh-food side, water near the base, slowing ice maker, compressor working harder. |
| What you can check | Describe which half changed first, whether the ice maker has slowed and how the compressor sounds compared with its usual pattern. Specific notes help most. |
| When to call a technician | A compressor that works harder, frost that returns or water near the base is a reason to book a technician. Share which half changed first. |
BI-48S is a Sub-Zero 48″ side-by-side refrigerator. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
On the older Classic (BI) series, 30 8 00 reports an open circuit in the ice accessories.
35 A 36 means the air filter fan is faulty on Classic (formerly Built-In) series units.
40 1 38 reports a refrigerator stepper valve communication fault on Classic (formerly Built-In) series units.
44 0 00 flags an open circuit on the glass door heater connector. Try a 30-second breaker reset, then book service.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
50 U 80 means the water flow meter is not detected on Built-In (BI) units.
Code 60 1 02 flags a communication error with the refrigerator variable speed compressor on Classic (BI) models.
Code 90 0 70 is a flash failure on Classic (formerly BI) series refrigerators and freezers.
95 1 25 is a refrigerator diagnostics failure from the 2009 Built-In (BI) series manual. No owner steps are listed.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.