Sub-Zero Refrigerator Error Code 10 1 00: Cabinet Thermistor Open
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero BI-30U over-and-under refrigerator-freezer — model notes, common issues and what to have ready before booking.
An over-and-under refrigerator-freezer such as the Sub-Zero BI-30U is a built-in layout, so owners usually notice small changes in daily use first. A freezer drawer that frosts more than before, water beneath the unit or a compressor that cycles at new times are the sort of changes they tend to report. This older model is still worth repairing. Note the day the change started and whether the ice maker, if fitted, is still producing. Noting the date the change began gives the technician a useful starting point. Households in the metro areas we cover should enter the model number BI-30U and these notes in the booking form.
| Model | BI-30U |
|---|---|
| Appliance | 30-inch built-in over-and-under refrigerator-freezer |
| Common symptoms | A freezer drawer that frosts more than before, water beneath the unit, a compressor cycling at new times, and an ice maker that may have stopped producing. |
| What you can check | Note the day the change started and, if an ice maker is fitted, whether it is still producing. Knowing the date gives the technician a useful starting point. |
| When to call a technician | If the drawer frost, water beneath the unit or new compressor timing continues, book a technician visit. Include the date the change began. |
BI-30U is a Sub-Zero 30″ over-and-under refrigerator-freezer. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
On the older Classic (BI) series, 30 8 00 reports an open circuit in the ice accessories.
35 A 36 means the air filter fan is faulty on Classic (formerly Built-In) series units.
40 1 38 reports a refrigerator stepper valve communication fault on Classic (formerly Built-In) series units.
44 0 00 flags an open circuit on the glass door heater connector. Try a 30-second breaker reset, then book service.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
50 U 80 means the water flow meter is not detected on Built-In (BI) units.
Code 60 1 02 flags a communication error with the refrigerator variable speed compressor on Classic (BI) models.
Code 90 0 70 is a flash failure on Classic (formerly BI) series refrigerators and freezers.
95 1 25 is a refrigerator diagnostics failure from the 2009 Built-In (BI) series manual. No owner steps are listed.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.