35 r 33 reports a too-low refrigerator evaporator fan speed setting on Classic (formerly Built-In) series units.
Model compatibility: Sub-Zero reused visible code strings across series and model years, so 35 r 33 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Refrigerator evaporator fan speed setting too low.
Reading 35 r 33
The refrigerator evaporator fan speed setting is too low. That is the whole meaning of 35 r 33, found on Classic series units (formerly Built-In, BI).
At a glance
Code
35 r 33
What it means
Refrigerator evaporator fan speed setting too low.
What you can check
Use the home breaker: off, wait 30 seconds, then on. Afterwards, run the unit again and see whether the display is clear.
When to call a technician
Book a technician if the code is back after the reset, because the fan setting problem is still present.
Owner action
Use the home breaker: off, wait 30 seconds, on. Afterwards, retest the unit and see if the display is clear.
Call if
The code is back after the reset. Book service.
Related
35 r 34 is the shorted refrigerator evaporator fan.
10 r 00 is a refrigerator evaporator thermistor open fault.
Sub-Zero refrigerator repair appointments
We take Sub-Zero refrigerator repair calls for the Miami, New York, Houston, Los Angeles and San Diego metro areas at (844) 972-4767. You can also start on the refrigerator repair page. Have the code, model and serial numbers, and the reset result ready.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Sub-Zero appliance?
Book a specialist visit for a clear estimate and approval before any repair.