Code 10 0 01 appears on Designer (formerly Integrated) Series units set up for DEFL configuration and points to a shorted thermistor.
Model compatibility: Sub-Zero reused visible code strings across series and model years, so 10 0 01 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Model programmed for DEFL configuration and has shorted thermistor.
Designer Series code 10 0 01
This code belongs to the Designer series, the line formerly called Integrated. The manufacturer defines it as a model programmed for DEFL configuration with a shorted thermistor.
At a glance
Code
10 0 01
What it means
Model programmed for DEFL configuration and has shorted thermistor.
What you can check
Cycle the unit's breaker: off for 30 seconds, then on, and retest operation.
When to call a technician
Anything beyond that reset is for a technician, so if the code returns, book a service visit and have the serial details ready.
The owner step is short: turn the breaker to the unit off for 30 seconds, turn it back on and retest operation. Anything more is for a technician.
Neighbouring code
Code 10 0 02: 10 0 02, the same configuration with an unstable thermistor
Code 10 1 11: 10 1 11, a short in the Zone 1 evaporator thermistor
Designer Series refrigerator service
Sub-Zero Designer refrigerator calls are taken for Miami, New York, Houston, Los Angeles and San Diego. Phone (844) 972-4767 with the code and the model and serial number from the unit. See refrigerator repair for the service itself.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Sub-Zero appliance?
Book a specialist visit for a clear estimate and approval before any repair.