Sub-Zero Refrigerator Error Code 10 1 00: Cabinet Thermistor Open
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero BI-42UFD french door refrigerator — model notes, common issues and what to have ready before booking.
Before a visit, a few safe checks can tell you a good deal about a 42-inch French door refrigerator. Open each refrigerator door in turn and feel whether the cool air is steady. Check that the bottom freezer drawer closes fully and that the seal lies flat around its edge. Look at the floor for water and see whether the ice maker, if fitted, is still making ice. Write down what you saw. The Sub-Zero BI-42UFD is an older model still worth repairing. Customers across the metro areas we cover can enter the model number BI-42UFD and these checks in the booking form.
| Model | BI-42UFD |
|---|---|
| Appliance | 42-inch French-door refrigerator |
| Common symptoms | Uneven cool air, freezer drawer that does not seal, water on the floor, ice maker that stopped making ice. |
| What you can check | Open each refrigerator door in turn and feel whether the air is steady. Check the freezer drawer closes fully with its seal flat, look for floor water and see if ice is still made. |
| When to call a technician | Arrange a technician visit if the air is uneven, the drawer will not seal or water keeps showing up. Write down what you saw first. |
BI-42UFD is a Sub-Zero 42″ french door refrigerator. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
On the older Classic (BI) series, 30 8 00 reports an open circuit in the ice accessories.
35 A 36 means the air filter fan is faulty on Classic (formerly Built-In) series units.
40 1 38 reports a refrigerator stepper valve communication fault on Classic (formerly Built-In) series units.
44 0 00 flags an open circuit on the glass door heater connector. Try a 30-second breaker reset, then book service.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
50 U 80 means the water flow meter is not detected on Built-In (BI) units.
Code 60 1 02 flags a communication error with the refrigerator variable speed compressor on Classic (BI) models.
Code 90 0 70 is a flash failure on Classic (formerly BI) series refrigerators and freezers.
95 1 25 is a refrigerator diagnostics failure from the 2009 Built-In (BI) series manual. No owner steps are listed.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.