Sub-Zero Refrigerator Error Code 10 1 00: Cabinet Thermistor Open
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero BI-42SD side-by-side refrigerator with ice/water dispenser — model notes, common issues and what to have ready before booking.
The exact model number carries real weight for a 42-inch side-by-side with an ice and water dispenser, because the dispenser hardware, the water line and the cooling circuit each vary between configurations. Two cabinets that look alike may not share the same parts. The Sub-Zero BI-42SD is an older model still worth repairing, and a precise number lets the technician plan around its particular layout. Describe whether water leaks inside or beneath the cabinet, whether the freezer frosts, whether the fresh-food side is warm and whether the compressor is louder than before. Households across our coverage area should record BI-42SD with these observations in the booking form.
| Model | BI-42SD |
|---|---|
| Appliance | 42-inch side-by-side with dispenser |
| Common symptoms | Leaks inside or beneath the cabinet, freezer frost, warm fresh-food side, louder compressor. |
| What you can check | Use the exact number from the rating label, since dispenser hardware, water line and cooling differ by configuration. Describe any leaks, frost, warmth and compressor noise. |
| When to call a technician | Book a technician if water leaks inside or beneath the cabinet, the freezer frosts or the compressor grows louder. A precise number helps plan around its layout. |
BI-42SD is a Sub-Zero 42″ side-by-side refrigerator with ice/water dispenser. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
On the older Classic (BI) series, 30 8 00 reports an open circuit in the ice accessories.
35 A 36 means the air filter fan is faulty on Classic (formerly Built-In) series units.
40 1 38 reports a refrigerator stepper valve communication fault on Classic (formerly Built-In) series units.
44 0 00 flags an open circuit on the glass door heater connector. Try a 30-second breaker reset, then book service.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
50 U 80 means the water flow meter is not detected on Built-In (BI) units.
Code 60 1 02 flags a communication error with the refrigerator variable speed compressor on Classic (BI) models.
Code 90 0 70 is a flash failure on Classic (formerly BI) series refrigerators and freezers.
95 1 25 is a refrigerator diagnostics failure from the 2009 Built-In (BI) series manual. No owner steps are listed.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.