Sub-Zero Refrigerator Error Code 10 1 00: Cabinet Thermistor Open
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero BI-36UFDID french door refrigerator with internal dispenser — model notes, common issues and what to have ready before booking.
Units with a French door layout and an internal dispenser have more water and ice hardware than the plain version. Two units with similar doors can have different dispenser parts, so the number on the rating label should be copied exactly. The Sub-Zero BI-36UFDID is an older model that is still worth repairing when the cabinet is sound. Describe where water appears, whether the fresh-food side has warmed and whether the compressor has changed its run pattern. Those details, combined with the number, let a technician plan the visit around the likely path. Customers in the metro areas we serve should enter the model number BI-36UFDID in the booking form.
| Model | BI-36UFDID |
|---|---|
| Appliance | 36-inch French-door unit with dispenser |
| Common symptoms | Water appearing in odd places, warm fresh-food side, changed compressor run pattern, trouble in the dispenser water and ice parts. |
| What you can check | Copy the number from the rating label exactly, since similar doors can hide different dispenser parts. Describe where water appears and whether the fresh-food side has warmed. |
| When to call a technician | Book a service visit if water keeps showing up or the compressor pattern stays different. Your details let the technician plan the visit around the likely cause. |
BI-36UFDID is a Sub-Zero 36″ french door refrigerator with internal dispenser. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
On the older Classic (BI) series, 30 8 00 reports an open circuit in the ice accessories.
35 A 36 means the air filter fan is faulty on Classic (formerly Built-In) series units.
40 1 38 reports a refrigerator stepper valve communication fault on Classic (formerly Built-In) series units.
44 0 00 flags an open circuit on the glass door heater connector. Try a 30-second breaker reset, then book service.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
50 U 80 means the water flow meter is not detected on Built-In (BI) units.
Code 60 1 02 flags a communication error with the refrigerator variable speed compressor on Classic (BI) models.
Code 90 0 70 is a flash failure on Classic (formerly BI) series refrigerators and freezers.
95 1 25 is a refrigerator diagnostics failure from the 2009 Built-In (BI) series manual. No owner steps are listed.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.