Sub-Zero Refrigerator Error Code 10 1 00: Cabinet Thermistor Open
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero BI-36UA over-and-under refrigerator-freezer — model notes, common issues and what to have ready before booking.
Glass-front over-and-under units such as the Sub-Zero BI-36UA put the interior on display, so owners notice small changes through the door. Condensation, frost or a dim spot in the fresh-food section are the first things they report. The compressor and the floor under the cabinet are worth watching too. This older model is still worth repairing. Write down what changed, when it began and whether water has reached the floor. If the trouble only shows at certain times of day, write that down as well. Owners across the metro areas we serve can list the model number BI-36UA and those observations in the booking form.
| Model | BI-36UA |
|---|---|
| Appliance | 36-inch glass-door over-and-under unit |
| Common symptoms | Condensation, frost, a dim spot in the fresh-food section, a noisy compressor, water on the floor beneath the cabinet. |
| What you can check | Write down what changed, when it began and whether water has reached the floor. If the trouble shows only at certain times of day, record that too. |
| When to call a technician | When water reaches the floor, frost returns or the compressor sounds wrong, schedule a service visit and bring your written observations along. |
BI-36UA is a Sub-Zero 36″ over-and-under refrigerator-freezer (glass door). It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
On the older Classic (BI) series, 30 8 00 reports an open circuit in the ice accessories.
35 A 36 means the air filter fan is faulty on Classic (formerly Built-In) series units.
40 1 38 reports a refrigerator stepper valve communication fault on Classic (formerly Built-In) series units.
44 0 00 flags an open circuit on the glass door heater connector. Try a 30-second breaker reset, then book service.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
50 U 80 means the water flow meter is not detected on Built-In (BI) units.
Code 60 1 02 flags a communication error with the refrigerator variable speed compressor on Classic (BI) models.
Code 90 0 70 is a flash failure on Classic (formerly BI) series refrigerators and freezers.
95 1 25 is a refrigerator diagnostics failure from the 2009 Built-In (BI) series manual. No owner steps are listed.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.