Sub-Zero Refrigerator Error Code 10 1 00: Cabinet Thermistor Open
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero BI-36U over-and-under refrigerator-freezer — model notes, common issues and what to have ready before booking.
Before booking a repair, a few checks outside the cabinet can help. The Sub-Zero BI-36U is an over-and-under refrigerator-freezer, with the refrigerator section and the freezer stacked one above the other. Look at both doors’ seals, confirm the refrigerator section feels cool when you open the door, and check whether the air in the freezer feels steady. Check the floor beneath the unit for water and listen for a compressor that keeps running. If an ice maker is fitted, note whether it has stopped. This older model is still worth repairing. Households across the cities we cover should enter the model number BI-36U and what they checked in the booking form.
| Model | BI-36U |
|---|---|
| Appliance | 36-inch over-and-under refrigerator-freezer |
| Common symptoms | Refrigerator section not cool, unsteady freezer air, water on the floor, compressor that keeps running, ice maker that has stopped. |
| What you can check | Check both door seals, feel whether the refrigerator section is cool and the freezer air is steady, look under the unit for water, and note whether the ice maker has stopped. |
| When to call a technician | If water is on the floor, the compressor never stops or the cold will not hold, arrange a technician visit and share what you checked. |
BI-36U is a Sub-Zero 36″ over-and-under refrigerator-freezer. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
On the older Classic (BI) series, 30 8 00 reports an open circuit in the ice accessories.
35 A 36 means the air filter fan is faulty on Classic (formerly Built-In) series units.
40 1 38 reports a refrigerator stepper valve communication fault on Classic (formerly Built-In) series units.
44 0 00 flags an open circuit on the glass door heater connector. Try a 30-second breaker reset, then book service.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
50 U 80 means the water flow meter is not detected on Built-In (BI) units.
Code 60 1 02 flags a communication error with the refrigerator variable speed compressor on Classic (BI) models.
Code 90 0 70 is a flash failure on Classic (formerly BI) series refrigerators and freezers.
95 1 25 is a refrigerator diagnostics failure from the 2009 Built-In (BI) series manual. No owner steps are listed.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.