Sub-Zero Refrigerator Error Code 10 1 00: Cabinet Thermistor Open
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero BI-36S side-by-side refrigerator — model notes, common issues and what to have ready before booking.
A 36-inch side-by-side refrigerator such as the Sub-Zero BI-36S gives owners two tall sections behind one pair of doors, so the people who use it every day tend to notice which side has changed before a technician ever arrives. A fresh-food area that is warmer than before, frost on the freezer walls or water collecting under the cabinet are the sorts of changes they report first. This older model is still worth repairing. Note which door gets used most and whether any change followed a power interruption. Households in our coverage area should enter the model number BI-36S and those details in the booking form.
| Model | BI-36S |
|---|---|
| Appliance | 36-inch side-by-side refrigerator |
| Common symptoms | Warmer fresh-food side, frost on the freezer walls, water collecting under the cabinet, changes that followed a power interruption. |
| What you can check | Read the model number from the rating label on a side wall, the ceiling or behind the base grille. Note which side changed and whether it followed a power interruption. |
| When to call a technician | Have a technician visit if the fresh-food side stays warm, frost keeps building or water keeps collecting under the cabinet. Give the technician the model number and your notes. |
BI-36S is a Sub-Zero 36″ side-by-side refrigerator. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
On the older Classic (BI) series, 30 8 00 reports an open circuit in the ice accessories.
35 A 36 means the air filter fan is faulty on Classic (formerly Built-In) series units.
40 1 38 reports a refrigerator stepper valve communication fault on Classic (formerly Built-In) series units.
44 0 00 flags an open circuit on the glass door heater connector. Try a 30-second breaker reset, then book service.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
50 U 80 means the water flow meter is not detected on Built-In (BI) units.
Code 60 1 02 flags a communication error with the refrigerator variable speed compressor on Classic (BI) models.
Code 90 0 70 is a flash failure on Classic (formerly BI) series refrigerators and freezers.
95 1 25 is a refrigerator diagnostics failure from the 2009 Built-In (BI) series manual. No owner steps are listed.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.