Sub-Zero Refrigerator Error Code 10 1 00: Cabinet Thermistor Open
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero BI-36RG refrigerator — model notes, common issues and what to have ready before booking.
The earliest clue with a built-in glass-door refrigerator is usually the sound. A compressor that runs longer than normal, a faint hum that starts after a quiet period or a new vibration through the cabinet often comes before any temperature change. Water near the base and a frosting freezer can appear later. The Sub-Zero BI-36RG is an older model and still worth repairing. Write down the first sound you noticed, when it began and whether the water or frost followed. Customers across the metro areas we cover should list the model number BI-36RG and the sound in the booking form.
| Model | BI-36RG |
|---|---|
| Appliance | 36-inch glass-door refrigerator |
| Common symptoms | A compressor running longer than normal, a faint hum after a quiet period, a new vibration through the cabinet, water near the base, and a frosting freezer. |
| What you can check | Write down the first sound you noticed, when it began, and whether the water or frost followed. |
| When to call a technician | A sound that keeps changing, water at the base or frost that follows deserves a service visit. Share the first sound and its timing with the technician. |
BI-36RG is a Sub-Zero 36″ refrigerator (glass door). It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
On the older Classic (BI) series, 30 8 00 reports an open circuit in the ice accessories.
35 A 36 means the air filter fan is faulty on Classic (formerly Built-In) series units.
40 1 38 reports a refrigerator stepper valve communication fault on Classic (formerly Built-In) series units.
44 0 00 flags an open circuit on the glass door heater connector. Try a 30-second breaker reset, then book service.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
50 U 80 means the water flow meter is not detected on Built-In (BI) units.
Code 60 1 02 flags a communication error with the refrigerator variable speed compressor on Classic (BI) models.
Code 90 0 70 is a flash failure on Classic (formerly BI) series refrigerators and freezers.
95 1 25 is a refrigerator diagnostics failure from the 2009 Built-In (BI) series manual. No owner steps are listed.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.