Sub-Zero Refrigerator Error Code 10 1 00: Cabinet Thermistor Open
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero BI-36RA refrigerator — model notes, common issues and what to have ready before booking.
Start with the outside of a glass-door 36-inch refrigerator before you call. The Sub-Zero BI-36RA is an older built-in model that still merits service. Check the glass-front seal for gaps, confirm the door closes firmly and feel for warmth near the top of the interior. Listen for a compressor that runs without a pause, and check the floor beneath the cabinet for water. If the ice maker is fitted, see whether it is still producing. Write these checks down so the technician sees what you tested. Owners in the cities we serve should enter BI-36RA and the results in the booking form.
| Model | BI-36RA |
|---|---|
| Appliance | 36-inch glass-door refrigerator |
| Common symptoms | Gaps in the glass-front seal, warmth near the top of the interior, a compressor that runs without a pause, floor water, and an ice maker that may not be producing. |
| What you can check | Check the glass-front seal for gaps, confirm the door closes firmly, feel for warmth near the top, listen for a nonstop compressor and look for floor water. Write the results down. |
| When to call a technician | If the seal and door check out yet warmth, floor water or nonstop compressor running remains, call for a technician. Share what you tested so they can see it. |
BI-36RA is a Sub-Zero 36″ refrigerator (glass door). It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
On the older Classic (BI) series, 30 8 00 reports an open circuit in the ice accessories.
35 A 36 means the air filter fan is faulty on Classic (formerly Built-In) series units.
40 1 38 reports a refrigerator stepper valve communication fault on Classic (formerly Built-In) series units.
44 0 00 flags an open circuit on the glass door heater connector. Try a 30-second breaker reset, then book service.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
50 U 80 means the water flow meter is not detected on Built-In (BI) units.
Code 60 1 02 flags a communication error with the refrigerator variable speed compressor on Classic (BI) models.
Code 90 0 70 is a flash failure on Classic (formerly BI) series refrigerators and freezers.
95 1 25 is a refrigerator diagnostics failure from the 2009 Built-In (BI) series manual. No owner steps are listed.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.