Sub-Zero Refrigerator Error Code 10 1 00: Cabinet Thermistor Open
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero BI-36F freezer — model notes, common issues and what to have ready before booking.
Built-in freezers rarely announce a problem in one dramatic moment. The Sub-Zero BI-36F is a 36-inch unit that is no longer in production, and its trouble usually builds slowly: water beneath the cabinet, an ice maker that yields less than it did, or a compressor that runs for longer stretches. Because the freezer sits in the same spot every day, those changes tend to get noticed, which is useful evidence. This older model is still worth repairing when the cabinet seals and the door close properly. Give the technician a timeline: when the sound changed, which door gets opened most and whether water appeared after a big restock. Put BI-36F and those observations in the booking form.
| Model | BI-36F |
|---|---|
| Appliance | 36-inch built-in freezer |
| Common symptoms | Water beneath the cabinet, an ice maker yielding less, a compressor running longer stretches, and a door or seal that may not close properly. |
| What you can check | Give a timeline: when the sound changed, which door gets opened most, and whether water appeared after a big restock. Check that the cabinet seals and the door close properly. |
| When to call a technician | Water beneath the cabinet, reduced ice or longer compressor stretches that keep happening call for a technician. Bring your timeline to the visit. |
BI-36F is a Sub-Zero 36″ freezer. It is no longer sold new, but units in homes are still serviced. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
10 1 00 comes from the 2009 service manual for the older Built-In (BI) Series and means the refrigerator cabinet thermistor is open.
Sub-Zero code 15 1 00: refrigerator compressor relay stuck open. Try a 30 second breaker reset, then call service if it returns.
On Classic (BI) and Designer units, 20 2 00 reports a defrost bi-metal stuck open.
On the older Classic (BI) series, 30 8 00 reports an open circuit in the ice accessories.
35 A 36 means the air filter fan is faulty on Classic (formerly Built-In) series units.
40 1 38 reports a refrigerator stepper valve communication fault on Classic (formerly Built-In) series units.
44 0 00 flags an open circuit on the glass door heater connector. Try a 30-second breaker reset, then book service.
45 1 00 reports an open circuit in the main refrigerator lights. Reset the breaker for 30 seconds and retest.
50 U 80 means the water flow meter is not detected on Built-In (BI) units.
Code 60 1 02 flags a communication error with the refrigerator variable speed compressor on Classic (BI) models.
Code 90 0 70 is a flash failure on Classic (formerly BI) series refrigerators and freezers.
95 1 25 is a refrigerator diagnostics failure from the 2009 Built-In (BI) series manual. No owner steps are listed.
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.