15 1 01 means the zone 1 compressor relay is stuck closed. Cycle the breaker and retest.
Model compatibility: Sub-Zero reused visible code strings across series and model years, so 15 1 01 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
The zone 1 compressor relay is stuck closed.
The display code 15 1 01 points to the zone 1 compressor relay, which has been detected stuck closed. Sub-Zero lists it for two lines: the Designer Wine Storage / Integrated Wine (IW) Series and the Designer (formerly Integrated) Series.
At a glance
Code
15 1 01
What it means
The zone 1 compressor relay is stuck closed.
What you can check
Flip the unit's breaker at the house panel to off and let thirty seconds pass. Flip it on and see whether the unit runs without the code.
When to call a technician
A repeat of the code after the reset means it is time to call for service. Say that the breaker was cycled.
Owner reset
Flip the unit’s breaker at the house panel to off.
Let thirty seconds pass.
Flip it on and see if the unit runs without the code.
When the code stays
A repeat of 15 1 01 after the reset means it is time to call for service.
Related codes
15 1 00: Zone 1 compressor relay that is stuck open
15 2 01: Zone 2 compressor relay, which is stuck closed
15 C 01: relay for the AC condenser fan, stuck closed
Booking Sub-Zero wine storage repair
Calls from the Miami, New York, Houston, Los Angeles and San Diego metro areas go to (844) 972-4767; the wine storage service page has the details. Tell them the code, give the model and serial number, and say the breaker was cycled.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Sub-Zero appliance?
Book a specialist visit for a clear estimate and approval before any repair.