10 2 00 reports an open Zone 2 cabinet thermistor. The listed first step is a 30-second breaker cycle and a retest.
Model compatibility: Sub-Zero reused visible code strings across series and model years, so 10 2 00 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
The Zone 2 cabinet thermistor is open.
The display reads 10 2 00, and the fault it names is an open thermistor in the cabinet of Zone 2. The code appears in the common answer pages for the 600, 648PRO and 700 Series and for the Designer (formerly Integrated) Series.
At a glance
Code
10 2 00
What it means
The Zone 2 cabinet thermistor is open.
What you can check
Go to the home circuit breaker for the unit and switch it off. Count out 30 seconds, switch it back on, and run the unit again.
When to call a technician
When the code returns after the reset, book a service visit and say that you already cycled the breaker.
What to try first
Go to the home circuit breaker for the unit and switch it off. Count out 30 seconds, switch it back on, and then run the unit again.
If 10 2 00 returns
If the code returns after the reset, book service.
Other Zone 2 codes
10 2 01: the same Zone 2 cabinet thermistor, reported as a short
10 2 02: the same sensor again, reported as unstable
Sub-Zero wine storage service for Miami, New York, Houston, Los Angeles and San Diego
For a Sub-Zero wine storage unit in the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 972-4767 or read about wine storage repair. Have 10 2 00, the model and serial number, and a note that you already cycled the breaker ready when you call.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Sub-Zero appliance?
Book a specialist visit for a clear estimate and approval before any repair.