H2 LO locks the dispenser after the water valve ran continuously for 150 seconds or 1 gallon came out within 15 minutes. It unlocks by itself after 45 minutes.
Model compatibility: Sub-Zero reused visible code strings across series and model years, so H2 LO / H2LO / H2 L0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
H2 LO means the water valve was energized continuously for 150 seconds or 1 gallon was dispensed within 15 minutes, so the dispenser locked.
What H2 LO means
On a Classic (BI) Series refrigerator with a water dispenser, H2 LO (also typed H2LO or H2 L0) is a lockout. The unit locks the dispenser when the water valve has been energized continuously for 150 seconds, or when 1 gallon has been dispensed within 15 minutes.
At a glance
Code
H2 LO / H2LO / H2 L0
What it means
The dispenser locked after the water valve ran too long or too much water came out too quickly.
What you can check
Wait, because the dispenser unlocks on its own after 45 minutes. You can also try unlocking it sooner by following the model-specific steps in your owner materials.
When to call a technician
Book a service visit should the lock return after normal use, or if the dispenser stays locked well past 45 minutes. Note how long the water ran.
What to do
Wait. The dispenser unlocks automatically after 45 minutes. The manufacturer’s answer page also has model-specific steps for unlocking sooner; check them against your model.
Where it applies
Classic (BI) Series units fitted with the water dispenser. Refrigerators of this line may also have an ice maker.
Related lock code
Another code is L0 C, which appears when a command is entered while the door reads closed.
Dispenser and refrigerator service near you
Should the lock come back after normal use, or the dispenser stay locked well past 45 minutes, book service. Sub-Zero refrigerator service covers the Miami, New York, Houston, Los Angeles and San Diego metro areas: (844) 972-4767 or the refrigerator repair page. Keep the model, serial number and a note of how long the water ran.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Sub-Zero appliance?
Book a specialist visit for a clear estimate and approval before any repair.