Skip to content
Sub-Zero appliance repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Sub-Zero Refrigerator Error Code 23 (EC 23): Overheat, No Feedback

Error code 23 / EC 23
Appliance Refrigerator
Quick answer

Code 23 (EC 23) is defrost overheat with no voltage feedback at defrost start.

Model compatibility: Sub-Zero reused visible code strings across series and model years, so 23 / EC 23 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Code 23 (EC 23) means defrost overheat together with no voltage feedback through the gray/white wire at defrost start.

Two defrost findings are combined in 23 (also shown as EC 23): the defrost overheated, and no voltage feedback came back through the gray/white wire when defrost began.

At a glance

Code 23 / EC 23
What it means Code 23 (EC 23) means defrost overheat together with no voltage feedback through the gray/white wire at defrost start.
What you can check Switch the unit's home circuit breaker off for 30 seconds and back on again, then see how the unit operates.
When to call a technician If 23 appears again after the reset, arrange a technician visit and mention that the breaker was already cycled.

Applies to

  • 600 Series
  • 700 Series, 736 included
  • IC-27 Integrated Columns
  • Undercounter (UC) Series
  • 648PRO Series, where the entry lists the code with no stated cause

The reset

Switch the unit’s home circuit breaker off for 30 seconds and back on again, then see how the unit operates. If 23 appears again, arrange a technician visit.

Compare

  • EC21: overheat alone.
  • EC22: missing feedback alone.
  • EC24: defrost underheat.

Sub-Zero service near you

For Sub-Zero refrigerators we serve the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 972-4767 or go to our refrigerator service page with the code, model and serial number, and say that the breaker was already cycled.

Source: Sub-Zero owner support: 600 Series error codes; Sub-Zero owner support: 648PRO Series error codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Sub-Zero appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Sub-Zero appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Sub-Zero appliance repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.

Request your repair

Fields marked with * are required.

Call Schedule a visit