On the older Classic (BI) series, 30 8 30 means water was detected passing through a valve that was not opened.
Model compatibility: Sub-Zero reused visible code strings across series and model years, so 30 8 30 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
On Classic (formerly Built-In, BI) units, 30 8 30 means the water valve was not opened but water was observed passing through.
What the unit has detected
Code 30 8 30 describes a water valve that has not been opened while water is still seen passing through it.
At a glance
Code
30 8 30
What it means
On Classic (formerly Built-In, BI) units, 30 8 30 means the water valve was not opened but water was observed passing through.
What you can check
Switch off the home circuit breaker to the unit and wait 30 seconds. Switch it on again and retest operation.
When to call a technician
Arrange a technician visit promptly if the code returns. Water passing through a valve that should be closed, with the flashing wrench and chime, needs a technician.
Series and where the code shows
Classic Series, formerly Built-In (BI): the older built-in line. On the display, the service wrench flashes and the alarm chimes.
Owner reset
Switch off the home circuit breaker to the unit and wait 30 seconds. Switch on again and retest operation. If 30 8 30 returns, book service.
We cover Sub-Zero refrigerators in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Arrange a visit on the refrigerator repair page or at (844) 972-4767 with the code, model and serial number and a note of the reset.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Sub-Zero appliance?
Book a specialist visit for a clear estimate and approval before any repair.